Call Toll Free: 1-800-882-4959
Please Ask for Internet Sales
 
Multiquip VC2B MICON Vibrator Controller
A patented process in conjunction with a microprocessor converts standard 120-Volt, 60-cycle current into 58-Volt, 400Hz. This controller constantly monitors the power demand generated by the vibrator head submerged into concrete and instantly adjusts the exciter rpm to meet the power demand to maintain a constant 12,000 vpm.

BP25H Backpack Vibrator
VC2B High-Cycle
Vibrator Controller

For Two Vibrators
(Sold Separately below):
$2,329.95
  • Features & Benefits
    of VC2B
    MICON Controllers
    Please click here
  • 13 Foot
    Hose Length
    MICON Vibrators
    Please click here
  • 20 Foot
    Hose Length
    MICON Vibrators
    Please click here
  • Exstension cords
    for VC1A & VC2B
    MICON Systems
    Please click here

Features & Benefits of VC2B Vibrators

Multiquip’s Computer-Controlled Micon Concrete Vibrators are perfect for “zero” slump concrete applications, providing a higher level of consistent frequency than any other vibrator on the market today
  • Multiquip—the first with computer-controlled concrete
    vibrators. Conventional concrete vibrators have noticeably
    reduced motor RPM and frequency as soon as they are placed in
    the concrete. Multiquip’s Micon controller immediately sends more
    power to the head when it senses resistance that could cause the
    vibrator to slow down, ensuring that higher RPM and frequency are
    maintained throughout the vibrating process.
  • Multiquip patented vibrators maintain optimum frequency under virtually
    any slump condition; customers report from 20% to 30% greater
    frequency with far less operator strain.
  • The Micon controller constantly monitors and controls the motor
    to protect it from failure due to current surge, broken wires or short
    circuits. Burnt motors have been virtually eliminated.
  • Portable controller with convenient carrying handle
  • Utilizes standard 120VAC power outlet. No need for a specialized generator
  • Wrap-around frame protects the controller from accidential damage
  • Rubber cover acts as a rain shield and protects internal components
  • Dual outlet for vibrators


The Micon controller uses standard 120 volt, 60 cycle current; it converts this to 58 volt, 400 cycle current for use by the vibrator motor. The controller receives constant feedback information from the motor, allowing it to supply the exact amount of power required to maintain the optimum head RPM in relation to the slump of the concrete.

MICON Vibrators

Choose from:
1.25", 1.67", & 2" Heads
13.1' & 19.6' hose
65' cord standard or add an optional 100' Extension cord ( $499.95 )

Micon vibrators produce greater power with less noise and almost no vibration in the handling hose for far less operator strain. These hoses are 20-30% lighter than typical high-cycle vibrators. The VH Series units operate on 400Hz cycles and work with VC1A or VC2B controllers.
  • Ideal for low-slump concrete
  • Patented vibrators work with optimum frequency, less noise and virtually no vibration in the handling hose for reduced operator strain
  • Two-year warranty on the vibrator rotor and stator
  • Handling hose can be lengthened for specific applications to 45 feet (13.5 meters) 
  • To lengthen, optional extension cords and plug set are required

13 Foot Hose Shafts for VC1A Vibrators

P/N VH32A4M
1.25 Inch Vibratory Head & 13.1 Foot Hose Shaft
65 Foot Power Cord

$1,499.95

P/N VH42A4M
1.67 Inch Vibratory Head
& 13.1 Foot Hose Shaft
65 Foot Power Cord

$1,539.95

P/N VH52A4M
2 Inch Vibratory Head
& 13.1 Foot Hose Shaft
65 Foot Power Cord

$1,629.95



The Micon controller uses standard 120 volt, 60 cycle current; it converts this to 58 volt, 400 cycle current for use by the vibrator motor. The controller receives constant feedback information from the motor, allowing it to supply the exact amount of power required to maintain the optimum head RPM in relation to the slump of the concrete.

MICON Vibrators

Choose from:
1.25", 1.67", & 2" Heads
13.1' & 19.6' hose
65' cord standard or add an optional 100' Extension cord ( $499.95 )

Micon vibrators produce greater power with less noise and almost no vibration in the handling hose for far less operator strain. These hoses are 20-30% lighter than typical high-cycle vibrators. The VH Series units operate on 400Hz cycles and work with VC1A or VC2B controllers.
  • Ideal for low-slump concrete
  • Patented vibrators work with optimum frequency, less noise and virtually no vibration in the handling hose for reduced operator strain
  • Two-year warranty on the vibrator rotor and stator
  • Handling hose can be lengthened for specific applications to 45 feet (13.5 meters) 
  • To lengthen, optional extension cords and plug set are required

20 Foot Hose Shafts for VC1A Vibrators

P/N VH32A6M
1.25 Inch Vibratory Head & 19.6 Foot Hose Shaft
65 Foot Power Cord

$1,569.95

P/N VH42A6M
1.67 Inch Vibratory Head
& 19.6 Foot Hose Shaft
65 Foot Power Cord

$1,619.95

P/N VH52A6M
2 Inch Vibratory Head
& 19.6 Foot Hose Shaft
65 Foot Power Cord

$1,679.95



The Micon controller uses standard 120 volt, 60 cycle current; it converts this to 58 volt, 400 cycle current for use by the vibrator motor. The controller receives constant feedback information from the motor, allowing it to supply the exact amount of power required to maintain the optimum head RPM in relation to the slump of the concrete.

MICON Vibrators

Choose from:
1.25", 1.67", & 2" Heads
13.1' & 19.6' hose
65' cord standard or add an optional 100' Extension cord ( $499.95 )

Micon vibrators produce greater power with less noise and almost no vibration in the handling hose for far less operator strain. These hoses are 20-30% lighter than typical high-cycle vibrators. The VH Series units operate on 400Hz cycles and work with VC1A or VC2B controllers.
  • Ideal for low-slump concrete
  • Patented vibrators work with optimum frequency, less noise and virtually no vibration in the handling hose for reduced operator strain
  • Two-year warranty on the vibrator rotor and stator
  • Handling hose can be lengthened for specific applications to 45 feet (13.5 meters) 
  • To lengthen, optional extension cords and plug set are required

Extension Power Cord for VC1A or VC2B Controllers

P/N VHEC100
100 Foot Optional Extension Cord
$499.95



The Micon controller uses standard 120 volt, 60 cycle current; it converts this to 58 volt, 400 cycle current for use by the vibrator motor. The controller receives constant feedback information from the motor, allowing it to supply the exact amount of power required to maintain the optimum head RPM in relation to the slump of the concrete.

MICON Vibrators

Choose from:
1.25", 1.67", & 2" Heads
13.1' & 19.6' hose
65' cord standard or add an optional 100' Extension cord ( $499.95 )

Micon vibrators produce greater power with less noise and almost no vibration in the handling hose for far less operator strain. These hoses are 20-30% lighter than typical high-cycle vibrators. The VH Series units operate on 400Hz cycles and work with VC1A or VC2B controllers.
  • Ideal for low-slump concrete
  • Patented vibrators work with optimum frequency, less noise and virtually no vibration in the handling hose for reduced operator strain
  • Two-year warranty on the vibrator rotor and stator
  • Handling hose can be lengthened for specific applications to 45 feet (13.5 meters) 
  • To lengthen, optional extension cords and plug set are required