This new Model is an upgrade of the DPC7301 Power Cutter. This redesign retains
all the power of the 7301, while achieving new EPA PHASE II exhaust emissions
compliance.
|
- Five-stage (foam, paper, nylon) air filter system with "Advanced Directional
Air Flow" provides very clean air for better saw performance.
- Reinforced aluminum blade guard with 70 degree range of "limitless
positioning" using a marked knob handle.
- Improved ignition system with larger flywheel and rare earth magnets for more
power.
- Change Cutting Arm Position: simply changes from center position to
flush position - allowing cuts directly adjacent to curb edges, walls or directly
above the ground.
- Starter grip and decompression valve located on the same side for faster
starting
- ON/OFF Choke Operating Switch - on a single lever for operator convenience.
- Cushioned operator grips with 4 vibration absorption rubber buffers for
increased operator comfort.
- Water Kit is assembled to saw and can be used with a garden hose, gravity
tank or pressure tank.
- Improved exhaust emissions are EPA PHASE II COMPLIANT
- While maintaining power and performance.
|
|
- Max Spindle Speed:
4,300
- Wheel Diameter:
14 inches
- Arbor (with adaptor):
20 mm
- Max. Cutting Depth:
4-13/16 inches
|
|
