Upgrade Special - free upgrade
695F4's are sold out. Take advantage of this FREE UPGRADE to 695XL
695XLF4-12
New Saw Package P/N 553463
$2959.95
Cut up to 12" Deep as sold
Includes: a Second ProFORCE-25 Chain FREE
Valued at: $537.45
Saw Packages Include:
(1) Power Head
(1) Guide Bar
(1) Diamond Chains
(1) Guide Bar
(1) Diamond Chains
695F4
Concrete Chainsaws
The workhorse gas saw for the more than occassional cutter.
The workhorse gas saw for the more than occassional cutter.
Over 20 years
of ICS product innovation and experience culminating in the latest addition to their gas saw family. Everything that makes chain saws the preferable method in cutting concrete, stone, and masonry wrapped in a hungry, power filled package called the 695F4. All the great features from past ICS chain saws plus a few new innovations to make your day go a little easier. Deep, straight cuts and square corners with ease of use and dependable performance to match. If cutting concrete, stone, masonry or ductile iron pipe is your game changer.
Why the ICS 695F4 and 695GC are your GAME CHANGERs.
- Use on concrete, stone and masonry
- Square corners
- Narrow deep cutting up to 16 in. (40 cm)
- Small openings
- 94 cc gas powered engine
- Safe, no gyroscopic rotation
ICS 695 Series Saw Compatibility Breakdown
All 695 Series Saws use the same power head.
Saw Model |
The same 695F4/695PG Power Head is the same as used on every other 695(Series) Saw. |
Drive Sprocket |
Guide Bar |
Diamond Chains |
695F4 |
Equipped with sprocket 525496 the power head is referred to as a 695F4. Recommended for Pro Cutters. Primary Benefit: Professional grade faster cutting and longer lasting chains. |
525496 |
||
Compatibility with other versions of the 695(Series) Saws.
|
||||
695PG PowerGrit
|
Also equipped with a 525496 sprocket the powerhead can be referred to as a 695PG but a 695F4 is sold and delivered when purchased with PowerGrit Chains. Recommended for Utility Work: Primary Benefit - Faster, Easier, and Safer cutting of Ductile Iron Pipes in ground. |
525496
|
||
695GC |
Equipped with sprocket 70949 the power head is referred to as a 695GC.
Recommended for General Contractors. Primary Benefit: Economical chains. |
70949 |
Note: By switching drive sprockets all of these guide bars and diamond chains can be compatible with any 695 Series Saw
Switching Drive Sprockets is as easy as removing the retaining ring the retainer and spacer then switching drive sprockets and replacing the spacer, retainer and retaining ring.
695GC PRODUCT SPECIFICATIONS | |
WEIGHT | 21 lbs/9.6 kg (without bar and chain) |
BAR LENGTH | Up to 16" (40 cm) |
ENGINE SPEED | 11500 +/- 500 rpm, 2500-2800 rpm idle |
HORSEPOWER | 6.4 @ 9000 rpm |
ENGINE TYPE | 2-stroke, single cylinder, air cooled |
DISPLACEMENT | 5.7 cu. inch (94cc) |
POWERHEAD DIMENSIONS | 19"L x 14"H x 12"W (48 cm x 36 cm x 30 cm) |
NOISE LEVEL | 102 dB @ 3 ft (1 m) |
VIBRATION LEVEL | 8 meters/second2 (front handle) |
WATER SUPPLY | Minimum 20 psi (1.5 bar) |
FUEL MIX RATIO | 50:1 (2%) fuel-to-oil |
FUEL CAPACITY | 0.26 gal (1.0 liter) |
With both companies located in Portland Oregon, CESSCO Inc. has been a vital partner with ICS in
developing and expanding the market for Concrete Chainsaws. Work with the experts at CESSCO Inc. to get the most from your investment.
Call us at 1-800-882-4959
Please ask for Internet Sales
Please ask for Internet Sales