Call Toll Free: 1-800-882-4959
Please Ask for Internet Sales
Click Here for our ICS Products Page
$250 Rebate on ICS 680ES
Saw Packages purchased in December
613GC Saws are no longer available. The ICS 680ES is the newest version of this saw.
Click Here for our ICS Products Page
CESSCO Inc.
680ES Saw Package Deals Include:
(1) Power Head, (1) Guide Bar, (2) Chains
Concrete Cutting
ICS 680ES Concrete Cutting Chainsaw
680ES-GC
Economical design for the general contractor.
ICS 680ES Deep Cutting ChainsawCut deeper than other methods. Cut square corners with NO Overcut
ICS 680ES Square Corners
Ductile Iron Cutting
ICS 680ES Ductile Iron Cutting Chainsaw
680ES-PG
Affordably priced Utility saw for cutting in-ground pipe.
PowerGRIT lets you cut ductile iron pipes safer, faster, easier. Cutting from one side means Less excavation & faster results
680ES-PG Saws are safer than other methodsICS 680ES Ductile Iron Trench Cutting
ICS 680ES 12 Inch Concrete Chainsaw Package
680ES-GC 12"
Saw Package
$1,568.00
(1) PowerHead, (1) Guide Bar,
(2) TwinMAX-29 Chains, Free Ground Freight
ICS 680ES Ductile Iron 10 Inch Package
680ES-PG 10"
Saw Package
$1,388.00
(1) PowerHead, (1) Guide Bar,
(2) PowerGrit 10" Chains, Free Ground Freight
ICS 680ES 14 Inch Concrete Chainsaw Package
680ES-GC 14"
Saw Package
$1,640.00
(1) PowerHead, (1) Guide Bar,
(2) TwinMAX-32 Chains, Free Ground Freight
ICS 680ES Conversion Kit
680ES PowerGrit Conversion Kit
$476.00
(1) Guide Bar, (1) PowerGrit 10" Chain,
(1) PowerGrit Sprocket, Free Ground Freight
ICS 680ES-GC Power Head (P/N 576155)
680ES-GC Power Head
P/N 576155:
$1,088.00
For 680ES-PG Power Head Call 800-882-4959
Continental US Freight Time Estimate
Estimated Travel time for Concrete Chainsaw delivery

ICS 680ES Series Saw Compatibility Breakdown

All 680ES Series Saws use the same power head.

Saw Model
The same 680ES-GC
Power Head is the same as used on 680ES-PG Saws.
Drive Sprocket
Guide Bar
Diamond
Chains
680ES-GC
Equipped with sprocket 70949 the power head is referred to as a 680ES-GC.

Recommended for General Contractors. Primary Benefit: Economical chains.
70949
Compatibility with other versions of the 680ES Saws.
680ES-F4
ProFORCE Chains are not available for 680ES Series saws
680ES-PG
PowerGrit
Equipped with a 525496 sprocket the powerhead is referred to as a 680ES-PG

Recommended for Utility Work: Primary Benefit - Faster, Easier, and Safer cutting of Ductile Iron Pipes in ground.
525496
Switching Drive Sprockets is as easy as removing the retaining ring the retainer and spacer then
switching drive sprockets and replacing the spacer, retainer and retaining ring.
680ES PRODUCT SPECIFICATIONS
WEIGHT 21 lbs (9.5 kg) with bar and chain
BAR LENGTH Up to 14 in (35 cm) -
ENGINE SPEED 11500 +/- 500 rpm, 2800-3200 rpm idle
HORSEPOWER 5 hp (3.7 kW) @ 9500 rpm
ENGINE TYPE 2-stroke, single cylinder, air cooled
DISPLACEMENT 4.7 cu. inch (76.5 cc)
CHAIN SPEED 5300 fpm (27 m/s), free running
POWERHEAD DIMENSIONS 18 inches (45 cm) Length
11.5 inches (29 cm) Height
10 inches (25 cm) Width
NOISE LEVEL 100 dBA @ 3 ft (1 m)
VIBRATION LEVEL 10.5 meters/second2 (front handle)
WATER SUPPLY Minimum 20 psi (1.5 bar)
FUEL MIX RATIO 50:1 (4%) fuel-to-oil
FUEL CAPACITY 0.23 gal (.88 liter), 15-18 minutes
run time per tank
Click Here for our ICS Products Page
CESSCO Inc.
Is the largest independent dealer
of ICS products in North America
With both companies located in Portland Oregon, CESSCO Inc. has been a vital partner with ICS in developing and expanding the market for Concrete Chainsaws. Work with the experts at CESSCO Inc. to get the most from your investment.

CESSCO Inc sells new ICS 680GC Concrete Chainsaw Packages
Call us at 1-800-882-4959
Please ask for Internet Sales