Upgrade Special - free upgrade
695PG's are sold out. Take advantage of this FREE UPGRADE to 695XL
695XL-PG-16
Saw Package P/N 545018
$2,149.95
Cut up to 16" Deep as sold
Includes: a Second PowerGrit-29 Chain FREE
Valued at: $379.95

(1) Power Head
(1) Guide Bar
(2) Diamond Chains
(1) Guide Bar
(2) Diamond Chains
ICS 695PG Features & Benefits
Change the way you cut pipe. PowerGrit® Utility Saw Chain is a new pipe cutting system. From ductile iron to plastic pipe, PowerGrit will get you in and out of the job faster, easier and safer than other methods.
![]() |
The Problem: To fix a broken pipe you've got to dig a big hole, and then use equipment that wasn't designed for this job. |
The Solution: PowerGrit allows you to cut from one side. Reduce excavation time, increase safety. |
![]() |
Task |
PowerGrit Method |
Conventional Method |
Advantage |
Excavation |
Excavate to expose pipe and safe cutting window only. Requires only one side cutting access | FULLY expose pipe, create access around entire pipe. Must excavate 2-3 feet beyond the bottom of the pipe. | POWERGRIT: Less excavation. Smaller work zone. Reduced footpring / job impact. |
Hand Digging |
Relatively little hand digging required to provide a safe, clear cutting window. | Extensive hand digging required to provide full circle cutting access. | POWERGRIT: Less hand digging required when using the PowerGrit method. |
Cutting Ergonomics |
Cut clear through a pipe from a single side. No need to move to the other side or cut from below. | Must cut from all sides, including from below. | POWERGRIT: Single side access allow PowerGrit to provide a simpler, faster, and safer cutting process. |
Machine Performance |
Able to cut through a pipe full of water. The direct drive chain assures will perform even when wet. | Circular blade cutters stall when cutting a pipe full of water. Their belt drives can slip when wet. | POWERGRIT: No waiting for pipes to drain. Less down time for equipment. |
Safety |
Safely cut down through pipe - or plunge cut when necessary. No kick-back as associated with traditional wood chain saws. No need to adjust manufacturer guards in order to perform up-cutting. | Must cut from all sides. Many users have become accustomed to adjusting or removing manufacturer safety guard in order to perform the "up cut" | POWERGRIT : Safe alternative to conventional method. |
695PG Power Head SPECIFICATIONS | |
WEIGHT | 21 lbs/9.6 kg (without bar and chain) |
BAR LENGTH | Up to 16" (40 cm) |
ENGINE SPEED | 11500 +/- 500 rpm, 2500-2800 rpm idle |
HORSEPOWER | 6.4 @ 9000 rpm |
ENGINE TYPE | 2-stroke, single cylinder, air cooled |
DISPLACEMENT | 5.7 cu. inch (94cc) |
POWERHEAD DIMENSIONS | 19"L x 14"H x 12"W (48 cm x 36 cm x 30 cm) |
NOISE LEVEL | 102 dB @ 3 ft (1 m) |
VIBRATION LEVEL | 8 meters/second2 (front handle) |
WATER SUPPLY | Minimum 20 psi (1.5 bar) |
FUEL MIX RATIO | 50:1 (2%) fuel-to-oil |
FUEL CAPACITY | 0.26 gal (1.0 liter) |

695F4
Concrete Chainsaws
The workhorse gas saw for the more than occassional cutter.
The workhorse gas saw for the more than occassional cutter.

Why the ICS 695F4 and 695GC are your GAME CHANGERs.
- Use on concrete, stone and masonry
- Square corners
- Narrow deep cutting up to 16 in. (40 cm)
- Small openings
- 94 cc gas powered engine
- Safe, no gyroscopic rotation
ICS 695 Series Saw Compatibility Breakdown
All 695 Series Saws use the same power head.
Saw Model |
The same 695PG Power Head is the same as used on every other 695(Series) Saw. |
Drive Sprocket |
Guide Bar |
Diamond Chains |
695PG PowerGrit
|
Equipped with a 525496 sprocket the powerhead can be referred to as a 695PG but a 695F4 is sold and delivered when purchased with PowerGrit Chains. Recommended for Utility Work: Primary Benefit - Faster, Easier, and Safer cutting of Ductile Iron Pipes in ground. |
525496
|
||
Compatibility with other versions of the 695(Series) Saws.
|
||||
695F4 |
Also equipped with sprocket 525496 the power head is referred to as a 695F4. Recommended for Pro Cutters. Primary Benefit: Professional grade faster cutting and longer lasting chains. |
525496 |
||
695GC |
Equipped with sprocket 70949 the power head is referred to as a 695GC.
Recommended for General Contractors. Primary Benefit: Economical chains. |
70949 |
Note: By switching drive sprockets all of these guide bars and diamond chains can be compatible with any 695 Series Saw


Switching Drive Sprockets is as easy as removing the retaining ring the retainer and spacer then switching drive sprockets and replacing the spacer, retainer and retaining ring.
695GC PRODUCT SPECIFICATIONS | |
WEIGHT | 21 lbs/9.6 kg (without bar and chain) |
BAR LENGTH | Up to 16" (40 cm) |
ENGINE SPEED | 11500 +/- 500 rpm, 2500-2800 rpm idle |
HORSEPOWER | 6.4 @ 9000 rpm |
ENGINE TYPE | 2-stroke, single cylinder, air cooled |
DISPLACEMENT | 5.7 cu. inch (94cc) |
POWERHEAD DIMENSIONS | 19"L x 14"H x 12"W (48 cm x 36 cm x 30 cm) |
NOISE LEVEL | 102 dB @ 3 ft (1 m) |
VIBRATION LEVEL | 8 meters/second2 (front handle) |
WATER SUPPLY | Minimum 20 psi (1.5 bar) |
FUEL MIX RATIO | 25:1 (2%) fuel-to-oil |
FUEL CAPACITY | 0.26 gal (1.0 liter) |
With both companies located in Portland Oregon, CESSCO Inc. has been a vital partner with ICS in
developing and expanding the market for Concrete Chainsaws. Work with the experts at CESSCO Inc. to get the most from your investment.

Call us at 1-800-882-4959
Please ask for Internet Sales
Please ask for Internet Sales