Genuine ICS Diamond Chains for 695XL-F4 Saws |
![]() Replacement Diamond Chains for ICS 695XL-F4
Concrete Chainsaws ![]() |
12" ProFORCE Series Diamond Chains
12" ProFORCE-25 Diamond Chain
General Purpose Chain for Cutting Concrete with light rebar P/N 531743:
$519.95
Combo Pack:
$1,039.90
12" ProFORCE-25 Premium S Diamond Chain
Fast Cutting of Hard Reinforced Concrete P/N 531739:
$589.95
Combo Pack:
$859.90
12" ProFORCE-25 Premium L Diamond Chain
Longer Lasting chain when cutting Hard Reinforced Concrete P/N 531745:
$589.95
Combo Pack:
$1,179.90
12" ProFORCE-25 Abrasive Diamond Chain
for Cutting Soft Abrasive Material like Brick & Block P/N 531747:
$559.95
Combo Pack:
$1,119.90
12" Guide Bar for 695XL-F4 Saws Called a 12" bar for its 12" cutting depth Actual length: 17.4" ![]() Overall Length: 18.0" P/N 553208:
$139.95
|
16" ProFORCE Series Diamond Chains
16" ProFORCE-29 Diamond Chain
General Purpose Chain for Cutting Concrete with light rebar P/N 525342:
$609.95
Combo Pack:
$1,219.90
16" ProFORCE-29 Premium S Diamond Chain
Fast Cutting of Hard Reinforced Concrete P/N 531735:
$699.95
Combo Pack:
$1,399.90
16" ProFORCE-29 Premium L Diamond Chain
Longer Lasting chain when cutting Hard Reinforced Concrete P/N 525343:
$699.95
Combo Pack:
$1,399.90
16" ProFORCE-29 Abrasive Diamond Chain
for Cutting Soft Abrasive Material like Brick & Block P/N 525344:
$659.95
Combo Pack:
$1,319.90
16" Guide Bar for 695XL-F4 Saws Called a 16" bar for its 16" cutting depth Actual length: 17.4" ![]() Overall Length: 21.9" P/N 524490:
$219.95
|


ICS 695XL Series Saw Compatibility Breakdown
Saw Model |
Every 695XL Power Head is the same.
Only the Sprockets, Guide Bars, and Chains change. |
Drive Sprocket |
Guide Bar |
Diamond Chains |
695XL-GC |
Equipped with sprocket 70949 the power head is referred to as a 695XL-GC.
Recommended for General Contractors. Primary Benefit: Economical chains. |
70949 |
||
695XL-F4 |
Equipped with sprocket 525496 the power head is referred to as a 695XL-F4. Recommended for Pro Cutters. Primary Benefit: Professional grade faster cutting and longer lasting chains. |
525496 |
||
695XL-PG PowerGrit
|
Also equipped with a 525496 sprocket the powerhead can be referred to as a 695XL-PG but a 695F4 is sold and delivered when purchased with PowerGrit Chains. Recommended for Utility Work: Primary Benefit - Faster, Easier, and Safer cutting of Ductile Iron Pipes in ground. |
525496
|
Note: By switching drive sprockets all of these guide bars and diamond chains can be compatible with any 695XL Series Saw


Switching Drive Sprockets is as easy as removing the retaining ring the retainer and spacer then switching drive sprockets and replacing the spacer, retainer and retaining ring.
695XL PRODUCT SPECIFICATIONS | |
WEIGHT | 21 lbs/9.6 kg (without bar and chain) |
BAR LENGTH | Up to 16" (40 cm) |
ENGINE SPEED | 11500 +/- 500 rpm, 2500-2800 rpm idle |
HORSEPOWER | 6.4 @ 9000 rpm |
ENGINE TYPE | 2-stroke, single cylinder, air cooled |
DISPLACEMENT | 5.7 cu. inch (94cc) |
POWERHEAD DIMENSIONS | 19"L x 14"H x 12"W (48 cm x 36 cm x 30 cm) |
NOISE LEVEL | 102 dB @ 3 ft (1 m) |
VIBRATION LEVEL | 8 meters/second2 (front handle) |
WATER SUPPLY | Minimum 20 psi (1.5 bar) |
FUEL MIX RATIO | 50:1 (2%) fuel-to-oil |
FUEL CAPACITY | 0.26 gal (1.0 liter) |
With both companies located in Portland Oregon, CESSCO Inc. has been a vital partner with ICS in
developing and expanding the market for Concrete Chainsaws. Work with the experts at CESSCO Inc. to get the most from your investment.

Call us at 1-800-882-4959
Please ask for Internet Sales
Please ask for Internet Sales