Call Toll Free: 1-800-882-4959
Please Ask for Internet Sales
Click Here for our ICS Products PageCombo Pack - Buy 2 Chains get a free Guide Bar
CESSCO Combo Packs
Buy 2 ICS Chains &
Get a Guide Bar FREE

Genuine ICS Diamond Chains for 695XL-PG Saws
Replacement  Diamond Chains for 695GC Concrete Chainsaws
Replacement Diamond Chains for ICS 695XL-PG
Concrete Chainsaws
ICS 695GC Saws use TwinMAX Series Diamond Chains
12" PowerGrit Diamond Chains
12" PowerGrit-25 Diamond Chain
Ductile Iron Cutting Diamond Chain
P/N 547641: $359.95
Combo Pack: $719.90
12" Guide Bar for 695XL-PG Saws
Called a 12" bar for its 12" cutting depth Actual length: 17.4"

Overall Length: 18.0"
P/N 553208: $132.00
16" PowerGrit Diamond Chains
16" Powergrit-29 Diamond Chain
Ductile Iron Cutting Diamond Chain
P/N 537764: $369.95
Combo Pack: $739.90
16" Guide Bar for 695XL-PG Saws
Called a 16" bar for its 16" cutting depth Actual length: 17.4"

Overall Length: 21.9"
P/N 524490: $208.00
Continental US Freight Time Estimate
Estimated Travel time for Concrete Chainsaw delivery

ICS 695XL Series Saw Compatibility Breakdown

Saw Model
Every 695XL Power Head is the same. Only the Sprockets, Guide Bars, and Chains change.
Drive Sprocket
Guide Bar
Diamond
Chains
695XL-GC
Equipped with sprocket 70949 the power head is referred to as a 695XL-GC.

Recommended for General Contractors. Primary Benefit: Economical chains.
70949
695XL-F4
Equipped with sprocket 525496 the power head is referred to as a 695XL-F4.

Recommended for Pro Cutters. Primary Benefit: Professional grade faster cutting and longer lasting chains.
525496
695XL-PG
PowerGrit
Also equipped with a 525496 sprocket the powerhead can be referred to as a 695XL-PG but a 695F4 is sold and delivered when purchased with PowerGrit Chains.

Recommended for Utility Work: Primary Benefit - Faster, Easier, and Safer cutting of Ductile Iron Pipes in ground.
525496
Note: By switching drive sprockets all of these guide bars and diamond chains can be compatible with any 695XL Series Saw

Switching Drive Sprockets is as easy as removing the retaining ring the retainer and spacer then switching drive sprockets and replacing the spacer, retainer and retaining ring.
695XL PRODUCT SPECIFICATIONS
WEIGHT 21 lbs/9.6 kg (without bar and chain)
BAR LENGTH Up to 16" (40 cm)
ENGINE SPEED 11500 +/- 500 rpm, 2500-2800 rpm idle
HORSEPOWER 6.4 @ 9000 rpm
ENGINE TYPE 2-stroke, single cylinder, air cooled
DISPLACEMENT 5.7 cu. inch (94cc)
POWERHEAD DIMENSIONS 19"L x 14"H x 12"W
(48 cm x 36 cm x 30 cm)
NOISE LEVEL 102 dB @ 3 ft (1 m)
VIBRATION LEVEL 8 meters/second2 (front handle)
WATER SUPPLY Minimum 20 psi (1.5 bar)
FUEL MIX RATIO 50:1 (2%) fuel-to-oil
FUEL CAPACITY 0.26 gal (1.0 liter)
Click Here for our ICS Products Page
CESSCO Inc.
Is the largest independent dealer
of ICS products in North America
With both companies located in Portland Oregon, CESSCO Inc. has been a vital partner with ICS in developing and expanding the market for Concrete Chainsaws. Work with the experts at CESSCO Inc. to get the most from your investment.

CESSCO Inc sells new ICS 680GC Concrete Chainsaw Packages
Call us at 1-800-882-4959
Please ask for Internet Sales
ICS Also Makes Chains
for Competitors Saws: