880F4-FL Flush Cutting Saws
Great saws with a bad attitude.
ICS 880F4-FL Concrete Chainsaw Power Head
 |
8GPM Power Head:
P/N 549759 Includes:
(1) 8GPM 880F4 Power Head (1) Carrying Case Note: Bar and Chain sold separately |
12 GPM Power Head:
P/N 549760 Includes:
(1) 12GPM 880F4 Power Head (1) Carrying Case Note: Bar and Chain sold separately |
||
|
$3,740.00
|
$3,740.00
|
|||
880F4-FL makes flush cuts fast and simple.
When you’re in a tight spot, choose the 880F4-FL. The unique flush-cut design of these saws allows them to cut within 3/16 inches (4.8 mm) from walls or floors versus 1 and 1/8" side / 2" floor with the 880F4 standard power head. The 880F4-FL brings the precision of Diamond Chain Technology™ to a new level. Available in both 8 and 12 gpm (30 and 45 lpm) models. This saw is specifically for finishing work, and not recommended as a production saw. Please call if you have any questions: 1-800-882-4959. Thank you.
| 880F4 PRODUCT SPECIFICATIONS - 8 GPM | |
| WEIGHT | 27.3 lbs (12.4 kg) with 15-inch (38 cm) bar and chain |
| BAR LENGTH | Up to 25 inches (63 cm) |
| MOTOR SPEED | 6100 rpm |
| POWERHEAD DIMENSIONS | 23 inches (58.5 cm) length 10.5 inches (26.5 cm) height 9.5 inches (24 cm) width |
| TORQUE | 122 in-lbs |
| HORSEPOWER | 11.5 hp |
| HYDRAULIC SUPPLY | 8 gpm (30 lpm), 2500 psi (172.5 bar) |
| NOISE LEVEL | 107 dB @ 3 ft (1 m) |
| VIBRATION LEVEL | 2 meters/second2 (front handle) 6 meters/second 2 (rear handle) |
| WATER SUPPLY | Minimum 20 psi (1.5 bar) |
| • Product data shown is rated based on maximum input conditions and efficiency assumptions and may vary dependent on power supply. | |
| 880F4 PRODUCT SPECIFICATIONS - 12 GPM | |
| WEIGHT | 27.3 lbs (12.4 kg) with 15-inch (38 cm) bar and chain |
| BAR LENGTH | Up to 25 inches (63 cm) |
| MOTOR SPEED | 6500 rpm |
| POWERHEAD DIMENSIONS | 23 inches (58.5 cm) length 10.5 inches (26.5 cm) height 9.5 inches (24 cm) width |
| TORQUE | 172 in-lbs |
| HORSEPOWER | 17.5 hp |
| HYDRAULIC SUPPLY | 12 gpm (45 lpm), 2500 psi (172.5 bar) |
| NOISE LEVEL | 107 dB @ 3 ft (1 m) |
| VIBRATION LEVEL | 2 meters/second2 (front handle) 6 meters/second 2 (rear handle) |
| WATER SUPPLY | Minimum 20 psi (1.5 bar) |
| • Product data shown is rated based on maximum input conditions and efficiency assumptions and may vary dependent on power supply. | |
ICS 880F4-FL Common Replacement Parts
 |
Part Number |
Item Name |
Price and Order Button |
549761 |
Rim Sprocket 880F4-FL |
$215.00
|
|
523946 |
Chain Tensioner (880F4-FL |
$50.00
|
|
528561 |
Transtorque Shaft Adapter |
$95.00
|
|
