Call Toll Free: 1-800-882-4959
Please Ask for Internet Sales
An independently owned & operated Brick & Mortar store
in Portland Oregon since 1975
cessco.com & cessco.us are registered websites of CESSCO Inc.
Click Here for our ICS Products Page
695XL-PG Ductile Iron Chainsaw
WARNING: Read and understand all safety warnings and
instructions in the Operator Manual before you use this equipment.
695XL-PG Package 575827B
With a 12" Cutting Depth
695XL-PG 12 Inch Saw Package P/N 575827B0.444" Pitch
695XL Saw Package Includes:
(1) Power Head
(1) 12" guide bar
(1) 12" PowerGrit Chains
12" Saw Package
only: $2719.95
695XL-PG Package 575827
With a 16" Cutting Depth
695XL-PG 16 Inch Saw Package P/N 5758270.444" Pitch
695XL Saw Package Includes:
(1) Power Head
(1) 16" guide bar
(1) 16" PowerGrit Chains
16" Saw Package
only: $2859.85
Continental US Freight Time Estimate
Estimated Travel time for Concrete Chainsaw delivery
695XL Safety Notifications

READ THE Safety NOTICES
from the ICS 695XL Operation Manual,
before operating this equipment.

It is each end user's responsibility to utilize the Manufacturer's published information
for current changes
.
The 695XL-PG is the most advanced large sized 50:1 Gasoline Chainsaw from ICS
Available with 12 inch and 16 inch cutting depth options.
695XL-F4 & 695XL-PG Models Use 0.444" Pitch bars & chains,
easily switch to 3/8" Pitch 695XL-GC Systems
All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi
Quick links to 695XL specific products
695XL-GC
695XL - General Contractorr Saw Package
3/8" Pitch
General Contractor
Concrete Chainsaw
Same Power Head
as 695XL-PG
695XL-F4
695XL Pro Cutter Concrete Cutting System
0.444" Pitch
Pro Cutter
Concrete Cutting Chainsaw
Same Power Head
as 695XL-PG
Bars
695XL PG Replacement Guide Bars
0.444" Pitch
Guide Bars for
Ductile Chains
12" or 16"
Cutting Depth
Parts
695XL PG Replacement Parts
The versatile 695XL
3/8" Pitch or 0.444" Pitch Configuration.
The Power Heads all use these same parts
ICS Combo Pack for 695XL saws - Buy 2 ICS Chains get the ICS Guide Bar Free
CESSCO Combo Packs
Buy 2 ICS Chains &
Get a guide bar FREE!
695XL-GC
ICS FORCE3 Chains for 695XL-GC Saws
FORCE3 Chains
3/8" Pitch
Used by general contractors
for cutting concrete
695XL-F4
ICS ProFORCE Chains for 695XL-F4 Saws
ProFORCE Chains
0.444" Pitch
Used by Pro Cutters
for cutting concrete
695XL-PG
ICS PowerGrit Chains for 695XL-PG Saws
PowerGrit Chains
0.444" Pitch
Used by Utility Workers
for cutting Ductile Iron Pipe
Technical Specifications of the 695XL-PG
695XL PG Specification and Data Sheet


695XL-PG PRODUCT SPECIFICATIONS
WEIGHT 21 lbs/9.6 kg (without bar and chain)
BAR LENGTH Up to 16" (40 cm)
ENGINE SPEED 11500 +/- 500 rpm, 2500-2800 rpm idle
HORSEPOWER 6.4 @ 9000 rpm
TORQUE 50.4 in-lbs @ 7200 rpm
ENGINE TYPE 2-stroke, single cylinder, air cooled
DISPLACEMENT 5.7 cu. inch (94cc)
POWERHEAD DIMENSIONS 19 inches (48cm) Length
14 inches (36cm) Height
12 inches (30cm) Width
NOISE LEVEL 102 dB @ 3 ft (1 m)
VIBRATION LEVEL 8 meters/second2 (front handle)
WATER SUPPLY Minimum 20 psi (1.5 bar)
FUEL MIX RATIO 50:1 (2%) fuel-to-oil
FUEL CAPACITY 0.26 gal (1.0 liter)
estimate 15-18 minute run time per tank
These 695XL Power Heads - are sold without guide bars or chains.
695XL-GC Power Head
3/8" Pitch drive sprocket.
695XL-GC Power Head P/N 575862 695XL 3/8" Pitch
Power Head
Only: $2109.95
695XL-F4 & 695XL-PG Power Head
0.444" Pitch drive sprocket.
695XL-F4 and 695XL-PG  Power Head P/N 575862 695XL 0.444" Pitch
Power Head
Only: $2109.95
695XL-PG Ductile Iron Cutting Chainsaw

PowerGrit Cutting Techniques

PowerGrit Overview

PowerGrit vs Cut-Off Saw
Trench Cut
Valve Trimming