FORCE4 Standard 34 (P/N 531749)

FORCE4 Pro-Cutter Chains

WARNING: Read and understand all safety warnings
and instructions in your Operator Manual before using this equipment

Click here for the ICS Customer Service Page - then scroll down and click "Operator Manuals" to find your saw

FORCE4 Standard 34 Chain P/N 531749

All FORCE4 Chains are 0.444" Pitch

A tough, general purpose diamond chain.
Good in hard concrete. Better in soft concrete.
Best in medium concrete with light rebar.

FORCE4 Standard 34
P/N 531749

$949.95

Free Ground Freight

Contiguous United States

On All ICS Saws, Bars, & Chains

Please click here for our Freight Policy

Items may ship direct from the factory at CESSCO Inc discretion

Transit times are estimates and not guaranteed.

Estimated Travel time for Concrete Chainsaw delivery

Combo Pack - Buy 2 Chains: get a Guide Bar and sprocket free

Genuine ICS Diamond Chains
CESSCO Combo Packs: Buy 2 ICS Diamond Chains
and get the matching guide bar, and drive sprocket FREE

*free drive sprocket with gas and electric saws only*

FORCE4 Standard Combo Packs for LARGE Gas Saws

623F4/633F4

695F4

695XL-F4

20" Cutting Depth
531749-LRG-CP

$1899.90

Genuine ICS Diamond Chains
CESSCO Combo Packs: Buy 2 ICS Diamond Chains
and get the matching guide bar FREE

FORCE4 Standard Combo Packs for Hydraulic Saws

853PRO

880F4 / 890F4

20" Cutting Depth
531749-HYD-CP

$1899.90

FORCE4 Sandwich Combo Packs for Husqvarna 7-Spline Saws

Combo Packs for Husqvarna Saws include a 7-spline 0.444" Pitch sprocket. 9-spline sprockets are 3/8" pitch only.

Husqvarna

20" Cutting Depth
531749-LRG-CP

$1899.90

Husqvarna has to two drive systems and it's important to
know which drive system is equipped on your saw.

Older Husqvarna saws utilize
a 9-spline system

Identify these saws by the drive sprocket (also called a rim sprocket). These sprockets have a larger interior and 9 indents on the inner rim, called splines. These saws can only use the FORCE3 system from ICS. To convert your saw to the 7-Spline system, the PRO45 Kit P/N 588679701 is available below:

Newer Husqvarna saws utilize
a 7-spline system

Identify these saws by the drive sprocket
(also called a rim sprocket). These sprockets have a smaller interior and 7 indents on the inner rim, called splines. The PRO45 system changes the clutch cup to allow these saws to utilize the same bars, chains and sprockets as ICS Large Gas Saws

The Husqvarna PRO45 Kit for K970 Concrete Chainsaws converts the clutch drum from a 9-spline system to a 7-spline system.
P/N 588679701(Sprockets sold separately)

PRO45 Kit

$139.95

FORCE4: 0.444" Pitch Diamond Chains - Concrete & Hard Material

FORCE 4 Chain Type	Abrasive natural stone brick	Soft natural Stone Concrete (Residential)	Medium Concrete with light reinforcement	Hard Concrete with Heavy Reinforment
FORCE 4 Chain Type	Abrasive natural stone brick	Hardness <= 3000psi	Hardness 3000psi - 6000psi	Hardness <= 8000psi
Standard General Purpose		◆ ◆	◆ ◆ ◆	◆
Premium L Longer Life Click Here		◆	◆ ◆	◆ ◆ ◆
Premium S Faster Cutting Click Here		◆	◆ ◆	◆ ◆ ◆
Sandwich Longer side clearance straighter cutting Click Here		◆	◆ ◆	◆ ◆ ◆
Cross-Link Less Operator Fatigue! Click Here		◆ ◆ ◆	◆ ◆ ◆	◆ ◆ ◆
Abrasive Best for Brick & Block Click Here	◆ ◆ ◆ ◆
Texas Edition HARDEST Materials Click Here				◆ ◆ ◆ ◆
Wide Kerf .375 width vs .225 while supplies last Click Here		◆	◆ ◆	◆ ◆ ◆

◆ = Good

◆ ◆ = Better

◆ ◆ ◆ = Best

◆ ◆ ◆ ◆ = Special Applications

Free Ground Freight

Contiguous United States

On All ICS Saws, Bars, & Chains

Please click here for our Freight Policy

Items may ship direct from the factory at CESSCO Inc discretion

ICS Safety Notifications

READ THE Safety NOTICES from the your ICS Operation Manual. It is each end user's responsibility to utilize the Manufacturer's published information for current changes.

Click here for the ICS Customer Service Page - then scroll down and click "Operator Manuals" to find your saw

ICS CHAINSAW SAFETY

ICS Concrete Chainsaw Cutting Techniques

How to Set-Up your Large ICS Gas Saw

How to Set-Up your ICS Hydraulic Saw

CESSCO Inc.

Is the largest independent dealer
of ICS products in North America

With both companies located in Portland Oregon, CESSCO Inc. has been a vital partner with ICS in developing and expanding the market for Concrete Chainsaws. Work with the experts at CESSCO Inc. to get the most from your investment.

Call us at 1-800-882-4959
Please ask for Internet Sales