603GC Directory
WARNING: Read and understand all safety warnings and
instructions in the Operator Manual before you use this equipment. |
All Small Gas Saws use the same Guide Bars and Diamond Chains
IF YOU STILL POSSESS AN OPERATING 603GC SMALL GAS SAW:
ICS is no longer able to provide several key parts. When you're no longer able to find parts to keep your saw operating call CESSCO Inc at 503-288-1242 - Ask for Internet Sales
Let CESSCO Inc make you the best offer possible on a new saw.
ICS is no longer able to provide several key parts. When you're no longer able to find parts to keep your saw operating call CESSCO Inc at 503-288-1242 - Ask for Internet Sales
Let CESSCO Inc make you the best offer possible on a new saw.
FORCE3 Chains
3/8" Pitch
Used by
general contractors
for cutting concrete
and natural stone
Used by
general contractors
for cutting concrete
and natural stone
Guide Bars
3/8" Pitch
Guide Bars for
Concrete Chains
10" Cutting Depth
On 603GC Saws
Guide Bars for
Concrete Chains
10" Cutting Depth
On 603GC Saws
Parts
The versatile 603GC
is a 3/8" Pitch Configuration saw.
Use Genuine ICS Parts for reliable operations.
is a 3/8" Pitch Configuration saw.
Use Genuine ICS Parts for reliable operations.
603GC Safety Notifications
READ THE Safety NOTICES from the ICS 603GC Operation Manual. It is each end user's responsibility to utilize the Manufacturer's published information for current changes.
ICS 603GC Small Gas Saws are no longer available.
These saws use 3/8" Pitch chains with 25 diamond segments to provide a 10" cutting depth.
These saws use 3/8" Pitch chains with 25 diamond segments to provide a 10" cutting depth.
Product Specification Note: 603GC saws are no longer in production or available for sale. The 603GC Saws are "Small" 2-Cycle Gas saws, and are similar to other ICS small gas saws such as the RZ60 an 660GC using the same bars, chains, and parts. |
|
603GC Concrete Chainsaw |
|
Weight |
17.6 Lbs with bar and chain |
Bar Length |
10 Inch cutting depth |
Engine Speed |
11500(+ 500) RPM |
Horsepower |
4.2 Hp @ 9500 RPM (64cc) |
Engine type |
2-stroke, single cylinder, air cooled |
Displacement |
3.9 cu. inch |
Dimensions |
17" Length 10" Height 12" Width |
Noise level |
101 dB @ 1 Meter |
Vibration Level |
10.1 Meters/second)2 (front handle) |
Water Supply |
Minimum 20 psi |
Fuel mix ratio |
25:1 gas to oil |
Fuel Capacity |
0.26 gallons 12-15 run time |
Chains Tensioning Instructions for ICS 603GC (680ES Shown in video)
CESSCO Inc.
Is the largest independent dealer
of ICS products in North America
of ICS products in North America
With both companies located in Portland Oregon, CESSCO Inc. has been a vital partner with ICS in
developing and expanding the market for Concrete Chainsaws. Work with the experts at CESSCO Inc. to get the most from your investment.
Call us at 1-800-882-4959
Please ask for Internet Sales
Please ask for Internet Sales