701A Directory
WARNING: Read and understand all safety warnings and
instructions in the Operator Manual before you use this equipment. |
701A Saws
0.444" Pitch
Pneumatic
Pro Cutter and Ductile Iron
Saw Packages
701A F4/PG
Guide Bars
0.444" Pitch
Guide Bars for
10" to 25" Cutting depth
for Concrete or
Ductile Iron chains
Guide Bars for
10" to 25" Cutting depth
for Concrete or
Ductile Iron chains
Parts
The versatile 701A
0.444" Pitch Configuration.
The Power Heads all use these same parts
0.444" Pitch Configuration.
The Power Heads all use these same parts
701A-F4
ProFORCE
& PowerGrit Chains
0.444" Pitch& PowerGrit Chains
Used by Pro Cutters
for cutting concrete
& Utility workers for cutting ductile iron pipes
701A Safety Notifications
READ THE Safety NOTICES from the ICS 701A Operation Manual. It is each end user's responsibility to utilize the Manufacturer's published information for current changes.
Technical Specifications of the 701A
| 701A PRODUCT SPECIFICATIONS | |
| WEIGHT | 29 lbs without bar and chain |
| BAR LENGTH | Up to 20 in |
| Operating SPEED | 5700 rpm |
| HORSEPOWER | 6.5 hp |
| ENGINE TYPE | Pneumatic |
| AIR SUPPLY | 90 psi 124 cfm |
| POWERHEAD DIMENSIONS | 20 inches (45 cm) Length 10.5 inches (29 cm) Height 12 inches (25 cm) Width |
| WATER SUPPLY | Minimum 20 psi, 2gpm |
ICS 701A Chain tensioning video (shown on a 890F4 Saw)
CESSCO Inc.
Is the largest independent dealer
of ICS products in North America
of ICS products in North America
With both companies located in Portland Oregon, CESSCO Inc. has been a vital partner with ICS in
developing and expanding the market for Concrete Chainsaws. Work with the experts at CESSCO Inc. to get the most from your investment.
Call us at 1-800-882-4959
Please ask for Internet Sales
Please ask for Internet Sales