To print our price list:  Please click here

Other sizes available by special order.

As there are more variables in core drilling than in any other type of cutting. Being competent in core drilling is the foundation of a good cutter.

• Speed (RPM)

  If the speed is too high the bit will polish. If the speed is too low the job will take too long.

• Power

  Is necessary to maintain the proper cutting speed. Efficient cutting means keeping the bit at the right speed.

• Water

  Not too little and not too much the right amount removes slurry and keeps the cut clean.

• Aggregate

  You can't see it until you're done, but a good driller can feel the right speed and pressure to cut varying types.

• Steel

  Slows the cutting process. Maintaining drill motor speed is important. DON'T PUSH THE BIT TOO HARD !- MAINTAIN SPEED !

• Bond Specs

  Too hard and it takes too long. Too soft and it costs too much.

• Proper Alignment

  Is necessary for good bit life. This means the rig must be properly anchored. A rig can be anchored with concrete anchors, vacuum or a post jack.         STANDING ON THE RIG IS DANGEROUS AND NOT ACCEPTABLE !

• Core Rig Maintenance

  Performance, speed and bit life will mean little if your rig has bad shims, bearings and hold down devices.