PowerGrit Ductile Cutting Chains
WARNING: Read and understand all safety warnings
and instructions in your Operator Manual before using this equipment |
PowerGrit Standard 25 Chain P/N 547641
Cut Ductile Iron: Faster - Safer - Easier
Designed to cut ductile iron, cast iron, A/C Pipe, PVC
All Powergrit chains are 0.444" Pitch
All Powergrit chains are 0.444" Pitch
Genuine ICS Diamond Chains
CESSCO Combo Packs: Buy 2 ICS Diamond Chains
and get the matching guide bar, and drive sprocket FREE
CESSCO Combo Packs: Buy 2 ICS Diamond Chains
and get the matching guide bar, and drive sprocket FREE
*free drive sprocket with gas and electric saws only*
PowerGrit Standard Combo Packs for MEDIUM Gas Saws
613GC
680GC
680ES
12" Cutting Depth
547641-MED-CP
547641-MED-CP
$879.90
PowerGrit Standard Combo Packs for LARGE Gas Saws
623F4/633F4
695F4
695XL-F4
12" Cutting Depth
547641-LRG-CP
547641-LRG-CP
$879.90
PowerGrit Standard Combo Packs for 536E 220volt Saws
536E
12" Cutting Depth
547641-MED-CP
547641-MED-CP
$879.90
Genuine ICS Diamond Chains
CESSCO Combo Packs: Buy 2 ICS Diamond Chains
and get the matching guide bar FREE
CESSCO Combo Packs: Buy 2 ICS Diamond Chains
and get the matching guide bar FREE
PowerGrit Standard Combo Packs for Hydraulic Saws
853PRO
880F4 / 890F4
10" Cutting Depth
547641-HYD-CP
547641-HYD-CP
$879.90
PowerGrit Standard Combo Packs for Pneumatic Saws
701A
10" Cutting Depth
547641-HYD-CP
547641-HYD-CP
$879.90
PowerGrit Standard Combo Packs for Husqvarna 7-Spline Saws
Husqvarna
12" Cutting Depth
547641-LRG-CP
547641-LRG-CP
$879.90
Husqvarna has to two drive systems and it's important to
know which drive system is equipped on your saw.
know which drive system is equipped on your saw.
Older Husqvarna saws utilizea 9-spline system
Identify these saws by the drive sprocket (also called a rim sprocket).
These sprockets have a larger interior and 9 indents on the inner rim,
called splines. These saws can only use the
FORCE3
system from ICS. To convert your saw to the 7-Spline system, the PRO45 Kit P/N 588679701
is available below:
Newer Husqvarna saws utilizea 7-spline system
Identify these saws by the drive sprocket
(also called a rim sprocket). These sprockets have a smaller interior and 7 indents on the inner rim, called splines. The PRO45 system changes the clutch cup to allow these saws to utilize the same bars, chains and sprockets as ICS Large Gas Saws
(also called a rim sprocket). These sprockets have a smaller interior and 7 indents on the inner rim, called splines. The PRO45 system changes the clutch cup to allow these saws to utilize the same bars, chains and sprockets as ICS Large Gas Saws
The Husqvarna PRO45 Kit for K970 Concrete Chainsaws converts the clutch drum from a 9-spline system to a 7-spline system.
P/N 588679701(Sprockets sold separately)
P/N 588679701(Sprockets sold separately)
PRO45 Kit
$139.95
ICS PowerGrit Standard and the NEW PowerGrit XL Chains
Make ICS the industry leader in Ductile Iron Cutting
Make ICS the industry leader in Ductile Iron Cutting
Product Benefits:
- Increased Safety
- Operator Control
- Reduced Excavation
- Better Access Versatility
Cuts These Materials:
- Ductile Iron Pipe
- Cast Iron Pipe
- PVC Pipe
- HDPE Pipe
- Insituform Pipe Lining
- Asbestos* Concrete Pipe
*Asbestos is a hazardous material, known to cause serious respiratory diseases. Cutting into asbestos can release asbestos fibers into the air. Always research
and follow the correct safety procedures, including applicable national and state or provisional occupational health and safety regulations, and protect yourself
and those around you from asbestos-related disease. Always arrange for the material to be removed safely by a qualified person. Neither ICS or CESSCO Inc are responsible for
exposure to asbestos caused by use of this product.
PowerGrit - Standard
Safer - Faster - Easier
The ICS Utility chain saw addresses operator safety with
its revolutionary grinding technology which
eliminates rotational kickback and improves operator
positioning when cutting pipe. Utilized by public and
private water and wastewater departments worldwide,
this patented platform, exclusively from ICS, is designed
to cut a variety of materials from ductile iron to plastic
pipe with far less excavation. The ability to cut up to 24”
pipe completely from one side radically reduces the
difficulty of the job. Complete your next job safer, faster
and easier with ICS Utility chain saws.
PowerGrit - XL
Incorporating the same safety and jobsite benefits as conventional PowerGrit chain, the new PowerGrit XL chain
expands the ICS Utility power cutter offering with an enhanced diamond coating formulation. The larger diamonds
and more aggressive grinding action equate to improved cutting performance in ductile and cast iron pipe with
drastically faster cutting speed in plastic pipe applications such as high density polyethylene (HDPE) materials.
PowerGrit: 0.444" Pitch Diamond Chains - Ductile Iron
Chain Type |
Ductile Iron / Cast Iron AC Pipe / Clay Pipe |
HDPE |
◆ ◆ ◆ |
||
◆ ◆ ◆ ◆ |
◆ ◆ ◆ |
◆ = Good |
◆ ◆ = Better |
◆ ◆ ◆ = Best |
◆ ◆ ◆ ◆ = Special Applications |
ICS Safety Notifications
READ THE Safety NOTICES from the your ICS Operation Manual. It is each end user's responsibility to utilize the Manufacturer's published information for current changes.
PowerGrit Cutting Techniques
PowerGrit Overview
PowerGrit vs Cut-Off Saw |
PowerGrit Trench Cut |
PowerGrit Valve Trimming |
CESSCO Inc.
Is the largest independent dealer
of ICS products in North America
of ICS products in North America
With both companies located in Portland Oregon, CESSCO Inc. has been a vital partner with ICS in
developing and expanding the market for Concrete Chainsaws. Work with the experts at CESSCO Inc. to get the most from your investment.
Call us at 1-800-882-4959
Please ask for Internet Sales
Please ask for Internet Sales