695XL Guide Bars

Combo Pack - Buy 2 680ES Chains: get a Guide Bar and sprocket free

ICS 695XL Replacement Guide Bars
CESSCO Combo Packs Buy 2 ICS Diamond Chains
and Get a FREE GUIDE BAR & SPROCKET

Estimated Travel time for Concrete Chainsaw delivery

Free Ground Freight

Contiguous United States

On All ICS Saws, Bars, & Chains

Please click here for our Freight Policy

Items may ship direct from the factory at CESSCO Inc discretion

FORCE3 3/8" Pitch Guide Bars

12 Inch 695XL-GC Guide Bar

Overall Length 17.4":

FORCE3 Guide Bar

3/8" Pitch 10" cutting depth
P/N 553207 - Used with 29 Segment FORCE3 Chains (sprocket 70949)

Only: $159.95

14 Inch 695XL-GC Guide Bar

Overall Length 19.7":

FORCE3 Guide Bar

3/8" Pitch 12" cutting depth
P/N 73600 - Used with 32 Segment FORCE3 Chains (sprocket 70949)

Only: $179.95

16 Inch 695XL-GC Guide Bar

Overall Length 21.9":

FORCE3 Guide Bar

3/8" Pitch 14" cutting depth
P/N 71600 - Used with 35 Segment FORCE3 Chains (sprocket 70949)

Only: $249.95

FORCE4 / PowerGrit 0.444" Pitch Guide Bars

12" 695XL-F4/PG Guide Bar

Overall Length 18.0":

FORCE3 Guide Bar

0.444" Pitch 12" cutting depth
P/N 553208 - Used with 25 Segment FORCE4 Chains (sprocket 525496)

Only: $159.95

16" 695XL-F4/PG Guide Bar

Overall Length 21.9":

FORCE3 Guide Bar

0.444" Pitch 16" cutting depth
P/N 524490 - Used with 29 Segment FORCE4 Chains (sprocket 525496)

Only: $259.95

20" 695XL-F4/PG Guide Bar

Overall Length 24.1":

FORCE3 Guide Bar

0.444" Pitch 16" cutting depth
P/N 626485 - Used with 34 Segment FORCE4 Chains (sprocket 525496)

Only: $299.95

Why is the overall length of a guidebar different from the
descriptive length of a guide bar?

A guide bar that is called a 12" bar on one saw may have a different overall length from a 12" guide bar on a different saw. This is because the drive sprocket on different powerheads are positioned at different distances from the front of the saws.

Descriptive (Called) Length

ICS Describes their guide bars by how deep the saw is able to cut into a concrete wall. A 12" guide bar cuts 12" into a concrete wall. The saw is able to cut 12" because the bar extends 12" out from the wall-walker.
That is why these two lengths are different.

It is best to use the overall length when your not sure of which guide bar to buy.
The overall length will always remain a constant.
As your chain stretches during normal use, you'll use the chain tensioner to extend the guide bar,
and it is therefore a less reliable measurement.

Diamond chains for ICS 695XL Concrete and Ductile chainsaws

The 695XL is the latest in a long line of ICS Large Sized gasoline powered concrete cutting chainsaws. Diamond chains and guide bars that fit the 695XL also fit on
and are compatible with bars and chains
for the 623(Series), 633(Series), 695(Series)