Call Toll Free: 1-800-882-4959
Please Ask for Internet Sales
Click Here for our ICS Products Page
ICS Guide Bar
Part Number 553207
Guide Bars P/N 553207 Concrete Chainsaws
12" Guide Bar (P/N 553207): $159.95
This guide bar is referred to as a 12 Inch guide bar because it will provide a
12 inch cutting depth when used with these Concrete Chainsaws:
Guide Bar 553207 fits on 695GC Concrete Chainsaws
& 695GC Saws
Guide Bar 553207 fits on 623GC and 633GC Concrete Chainsaws
& 633GC Saws
Guide Bar 553207 fits on Husqvarna Concrete Chainsaws
Husqvarna K960
& K970s
Guide Bar P/N 553207 - Referred to as a "12 Inch Guide Bar"Guide Bar 513122
Overall Length:
17.4 Inches (44.2cm)
Combo Packs - for Guide Bar 553207 COMBO PACKS
Buy any TWO 14" TwinMAX Chains
and get THIS $159.95 Guide Bar FREE
Includes 2 Chains and This Bar FREE
General purpose
TwinMAX-29 Plus
Reinforced concrete
Combo Pack:
TwinMAX-29 Abrasive
Soft abrasive material
Combo Pack:

This ICS video shows proper chain tensioning.

Why is the overall length of my guidebar different
from the descriptive length of my guide bar?
Overall Length
A guide bar that is called a 12" bar on one saw may have a different overall length from a guide bar on a different saw. This is because the drive sprocket on different powerheads are positioned at different distances from front of the saws.
Descriptive (Called) Length
ICS Describes their guide bars by how deep the saw is able to cut into a concrete wall. A 12" guide bar cuts 12" into a concrete wall. The saw is able to cut 12" because the bar extends 12" out from the saw powerhead. That is why these two lengths are different.
It is best to use the overall length when your not sure of which guide bar to buy. The overall length will always remain a constant.
However, as your chain stretches during normal use, you'll use the chain tensioner to extend the guide bar, and it is therefore a less reliable measurement.