Get the most out of your
This guide bar is referred to as a
10 Inch guide bar because it will provide
a
10 inch cutting depth when used with these ICS Concrete Chainsaws:
10 inch cutting depth when used with these ICS Concrete Chainsaws:
660GC Saws
603GC Saws
RZ60 Saws
Guide Bar P/N 517689 - Referred to as a "10 Inch Guide Bar"
Overall Length:
14.8 Inches (37.6cm) 
COMBO PACKSBuy any TWO 10" TwinMAX Chains
and get THIS $119.95 Guide Bar FREE
Includes 2 Chains and This Bar FREE
Chain Tensioning
Tip Sheet
Tip Sheet
Please Click Here
Concrete Cutting
Tip Sheet
Tip Sheet
Please Click Here
Chain Life
Tip Sheet
Tip Sheet
Please Click Here This ICS video shows proper chain tensioning.
Why is the overall length of my guidebar different
from the descriptive length of my guide bar?
from the descriptive length of my guide bar?
Overall Length
A guide bar that is called a 10" bar on one saw may have a different overall length from a guide bar on a different saw. This is because the drive sprocket on different powerheads are positioned at different distances from front of the saws.
Descriptive (Called) Length
ICS Describes their guide bars by how deep the saw is able to cut into a concrete wall. A 10" guide bar cuts 10" into a concrete wall. The saw is able to cut 10" because the bar extends 10" out from the saw powerhead. That is why these two lengths are different.
It is best to use the overall length when your not sure of which guide bar to buy. The overall length will always remain a constant.
However, as your chain stretches during normal use, you'll use the chain tensioner to extend the guide bar, and it is therefore a less reliable measurement.
However, as your chain stretches during normal use, you'll use the chain tensioner to extend the guide bar, and it is therefore a less reliable measurement.
