ICS 890F4 Replacement Guide Bars
CESSCO Combo Packs Buy 2 ICS Diamond Chains
and Get a FREE GUIDE BAR
CESSCO Combo Packs Buy 2 ICS Diamond Chains
and Get a FREE GUIDE BAR
Genuine ICS Guide Bars for 890F4 and other Large Hydraulic Saws
0.444" Pitch
10" Cutting Depth
P/N 529829
10" Cutting Depth
P/N 529829
Overall Length 16.7"
Only:
$159.95
0.444" Pitch
15" Cutting Depth
P/N 523080
15" Cutting Depth
P/N 523080
Overall Length 20.3"
Only:
$209.95
0.444" Pitch
20" Cutting Depth
P/N 529767
20" Cutting Depth
P/N 529767
Overall Length 24.8"
Only:
$259.95
0.444" Pitch
25" Cutting Depth
P/N 525320
25" Cutting Depth
P/N 525320
Overall Length 30.1"
Only:
$399.95
Why is the overall length of my guidebar different from the descriptive length of my guide bar?
Overall Length
A guide bar that is called a 10" bar on one saw may have a different overall length from a guide bar on a different saw. This is because the drive sprocket on different powerheads are positioned at different distances from front of the saws.
Descriptive (Called) Length
ICS Describes their guide bars by how deep the saw is able to cut into a concrete wall. A 10" guide bar cuts 10" into a concrete wall. The saw is able to cut 10" because the bar extends 10" out from the saw powerhead. That is why these two lengths are different.
It is best to use the overall length when your not sure of which guide bar to buy. The overall length will always remain a constant. However, as your chain stretches during normal use, you'll use the chain tensioner to extend the guide bar, and it is therefore a less reliable measurement.
The 890F4 is the latest in a long line of ICS Large Sized hydraulic powered concrete cutting chainsaws. Diamond chains and guide bars that fit the 890F4 also fit on
and are compatible with bars and chains
for the 853PRO*, 880F4, 880PG, 890PG
and are compatible with bars and chains
for the 853PRO*, 880F4, 880PG, 890PG
CESSCO Combo Packs
Buy 2 ICS Chains &
Get a guide bar FREE!
Buy 2 ICS Chains &
Get a guide bar FREE!
