NO LONGER AVAILABLE
Husqvarna 14" MS355 Portasaws
Husqvarna 14" MS355 Portasaws
- MS355 Portasaw
Single Phase
Electric Models
Click Here - MS355 Portasaw
Gas
Models
Click Here - MS355
Portasaw
Options
Click Here
- Masonry
Blades
Click Here
MS355 Portasaw 14 Inch 1.5Hp Single Phase Electric - 110Volt Stand not included |
No longer available
|
MS355 Portasaw 14 Inch 3.0Hp Single Phase Electric - 220Volt Stand not included |
No longer available
|
4.8 Hp Honda GX160 Gasoline Stand not included |
No longer available
|
Folding Stand |
|
Cutter's Choice Masonry Blades
Free Ground Freight (Continental U.S.)
|
|||
Masonry Blade Size (Dia. x Width x Arbor) |
Paver Masonry Blade |
Combo Brick / Block Blade |
Block Blade |
14" x .125" x 1" |
$119.95
DPBGP14125 |
$159.95
DCGSM14125 |
$169.95
DAGSM14125 |
1 Inch Arbor blades include a 20mm Bushing. |
|||
MS355 Portasaw
Specifications |
|
Blade Diameter |
14" |
Maximum Depth of Cut |
5" |
Bladeshaft RPM |
2150 |
Power Source |
Electric |
Power, Hp |
1-1/2 Hp |
Engine Manufacturer |
Baldor |
Engine specifications |
T.E.F.C. |
Blade Guard type (Sta-Level) |
one-piece steel |
Arbor size |
1" |
Bladeshaft bearings |
Ball Bearings |
Conveyor cart |
Cast aluminum |
Water pump high output |
Submersible |
Voltage |
115 Volts 60 Hertz |
Phase |
(1) Single Phase |
Full Load Amps |
14.4 |
Number of belts |
2 V-Belts |
Air Filter |
N/A |
Starter |
Capacitor |
Engine cooling |
Air |
Weight uncrated |
160 Lbs |
Shipping weight |
171 Lbs |
Dimensions (L x W x H) |
38" x 19.5" x 27" |
Well suited for contractors that need a mix of
production and portability. It can be easily
transported and the continuous-duty Baldor
electric motor or Honda gas engine provides
enough power to make it through the day.
MS355 Portasaw
Applications:
Applications:
- Capable of cutting brick, block or pavers on smaller jobs.
MS355 Portasaw
Benefits:
Benefits:
- Wider opening in back allows larger material to pass through.
- Saw head comes preassembled to frame to ensure quick set-up.
- High torque, continuous duty 110 or 220 volt electric motors or a 4.8 hp Honda gas engine provide high power and long life.
- Only two pivot points, which reduce maintenance and increase diamond blade life.
- Quickly change between plunge cutting or locking the head down for efficient cutting with the rolling cart.
- Sta-level® blade guard keeps the blade guard parallel to the cutting table for accurate cuts.
- The side handles make moving the saw easier.
- Pivot lock bar moved to front for convenient raise / lower operation of blade.
Diamond Products