Multiquip FXA60A6 High-Cycle Vibrator |
High-Cycle concrete vibrator: 2-3/8 Inch Head diameter, 20 Ft Hose
Includes: 33 Foot Power Cord 4.5 Amp Motor
weighs 65 Lbs.
Includes: 33 Foot Power Cord 4.5 Amp Motor
weighs 65 Lbs.
FXA60A6
High-Cycle Vibrator
Only:
50' Extension Cord for High-Cycle Vibrator
Only:
100' Extension Cord for High-Cycle Vibrator
Only:
60Hz-120V & 180Hz -230 Volt with a Honda GX340 Engine.
 |
3.6 kW Continuous
4.0 kW Maximum |
The industry's only generator that simultaneously produces 60Hz/180Hz power for standard tools and high-cycle vibrators. powered by a Honda GX340 engine that unit takes the place of two generators. Ideal for the professional contractor.
|
||
|
|
Multiquip’s High-Cycle Vibrators are designed for use in lowslump
concrete where consistent power is needed to liquefy
and move a stiff mix into corners and around rebar, or for any
job where extended length vibrators are required.
High-cycle vibrators (180 Hz) use a special three-phase,
low-induction electric motor, located within the vibrating head.
This close coupling translates into high efficiency—Mikasa High-
Cycle Vibrators retain at least 95%
of their power under load.
Productivity is maximized
due to the high
centrifugal force and
high frequency of the units.
- Powered by a 2-amp electric motor
- Permanently lubricated oversized head bearings for unmatched durability
- Hose can be extended to 45 feet (13.5 meters)
- Waterproof control box
- Optional 50- and 100-foot (15, 30 meters) extension cords available
- Requires high-cycle generator GDP5H
