Call Toll Free: 1-800-882-4959
Please Ask for Internet Sales
Click Here for our ICS Products Page
680ES-PG Saw Package Deals Include:
(1) Power Head, (1) Guide Bar, (2) Chains
Ductile Iron Cutting
ICS 680ES-PG Ductile Iron Cutting Chainsaw (P/N 580423)
Affordably priced Utility saw for cutting in-ground pipe.
PowerGRIT lets you cut ductile iron pipes safer, faster, easier. Cutting from one side means Less excavation & faster results
ICS 680ES Ductile Iron Trench Cutting
ICS 680ES-PG Ductile Iron 10 Inch Package (P/N 580423)
680ES-PG 10"
Saw Package
Saw Package P/N 580423 includes:
(1) PowerHead, (1) Guide Bar, (1) PowerGrit Sprocket, (2) PowerGrit 10" Chains,
& Free Ground Freight
ICS 680ES-PG Conversion Kit
680ES PowerGrit Conversion Kit
(1) Guide Bar, (1) PowerGrit 10" Chain,
(1) PowerGrit Sprocket, Free Ground Freight
ICS 680ES-GC Power Head (P/N 576155)
680ES-GC Power Head
P/N 576155:
For 680ES-PG Power Head Call 800-882-4959
Closeout Specials - While Supplies Last
Value priced with two chains. Please call for pricing with one chain
Continental US Freight Time Estimate
Estimated Travel time for Concrete Chainsaw delivery

ICS 680ES Series Saw Compatibility Breakdown

All 680ES Series Saws use the same power head.

Saw Model
The same 680ES-GC
Power Head is the same as used on 680ES-PG Saws.
Drive Sprocket
Guide Bar
Equipped with sprocket 70949 the power head is referred to as a 680ES-GC.

Recommended for General Contractors. Primary Benefit: Economical chains.
Compatibility with other versions of the 680ES Saws.
Not Available on 680ES Series saws
Equipped with a 525496 sprocket the powerhead is referred to as a 680ES-PG

Recommended for Utility Work: Primary Benefit - Faster, Easier, and Safer cutting of Ductile Iron Pipes in ground.
Switching Drive Sprockets is as easy as removing the retaining ring the retainer and spacer then
switching drive sprockets and replacing the spacer, retainer and retaining ring.
WEIGHT 21 lbs (9.5 kg) with bar and chain
BAR LENGTH Up to 14 in (35 cm) -
ENGINE SPEED 11500 +/- 500 rpm, 2800-3200 rpm idle
HORSEPOWER 5 hp (3.7 kW) @ 9500 rpm
ENGINE TYPE 2-stroke, single cylinder, air cooled
DISPLACEMENT 4.7 cu. inch (76.5 cc)
CHAIN SPEED 5300 fpm (27 m/s), free running
POWERHEAD DIMENSIONS 18 inches (45 cm) Length
11.5 inches (29 cm) Height
10 inches (25 cm) Width
NOISE LEVEL 100 dBA @ 3 ft (1 m)
VIBRATION LEVEL 10.5 meters/second2 (front handle)
WATER SUPPLY Minimum 20 psi (1.5 bar)
FUEL MIX RATIO 25:1 (4%) fuel-to-oil
FUEL CAPACITY 0.23 gal (.88 liter), 15-18 minutes
run time per tank
Click Here for our ICS Products Page
Is the largest independent dealer
of ICS products in North America
With both companies located in Portland Oregon, CESSCO Inc. has been a vital partner with ICS in developing and expanding the market for Concrete Chainsaws. Work with the experts at CESSCO Inc. to get the most from your investment.

CESSCO Inc sells new ICS 680GC Concrete Chainsaw Packages
Call us at 1-800-882-4959
Please ask for Internet Sales