Call Toll Free: 1-800-882-4959
Please Ask for Internet Sales
An independently owned & operated Brick & Mortar store
in Portland Oregon since 1975 & are registered websites of CESSCO Inc.
Replacement Parts for ICS 680ES Chainsaws
The ICS 680ES Repair Parts Price List is broken down into several diagrams and parts lists. Click on the link located to the right for a complete list of parts for the 680ES Saws.
CESSCO Inc highly encourages our customers to call our parts department at 1-800-882-4959 when ordering parts for our best price.
Multiple Parts or Multiple quantities of the same part
may be discounted from our online prices.
CESSCO Inc stocks many "fast moving" items, but stocking everything for every saw isn't feasible.
CESSCO Inc places 2-3 stocking orders with ICS every week.
Allowing us to order your parts with our stocking orders is economical.
However, having ICS Ship Direct for emergencies can be arranged. Unfortunately ICS has implemented a $75.00 drop ship fee
Click-To-Buy parts include ground freight in the price
Continental US Freight Time Estimate
Estimated Travel time for Concrete Chainsaw delivery
Drive Sprocket
p/n 70949 - ics drive sprocket for 3/8 inch pitch ICS  gas saws
3/8" Pitch
for use with TwinMAX and FORCE3 Chains
P/N 70949
ONLY: $29.95
Drive Sprocket
p/n 525496 - ics drive sprocket for 0.444 inch pitch ICS  gas saws
0.444" Pitch
for use with ProFROCE and PowerGrit Chains
P/N 525496
ONLY: $34.95
Air Filter
Air filter for ICS 680ES Saws
Air Filter
Polyester air filter canister

P/N 71752
ONLY: $49.95
Pre Filter
Prefilter for ICS 680ES Gas Saws
Internal Screen
part "J8"only
P/N 73336
ONLY: $29.95
Starter Assy
starter assy for ICS 680ES Gas saws
Starter Cover Assy

P/N 528637
ONLY: $131.00
Clutch Cup
Clutch cup for ICS 680ES gas saws
includes needle bearing
Clutch cup
with needle bearing
P/N 71520
ONLY: $59.95
Clutch Assy
Clutch assy for ICS 680ES gas saws
includes clutch spring
Clutch assembly
with Clutch Spring
P/N 71419
ONLY: $61.95
Piston Stop
Piston stop for ICS 680ES Gas saws
Service Item
Cylinder Assembly Clamps and Piston Stop
P/N 71543
ONLY: $34.95
Carburetor for ICS 680ES gas saws
Replacement Item
WJ-138 Carburetor
P/N 577754
ONLY: $169.95
Repair Kit
Carburetor repair kit for ICS 680ES gas saws
Service Item
Repair Kit
P/N 73996
ONLY: $59.95
Tensioner for ICS 680ES Gas saws
Chain Tensioner
for use with med gas saws like the 680ES
P/N 73935
ONLY: $39.95
Cylinder Assy
Piston and cylinder for ICS 680ES Gas Saws
Piston & Cylinder Assy
Complete Piston and Cylinder Assembly
P/N 548084
ONLY: $359.95
ICS Combo Pack for 695XL saws - Buy 2 ICS Chains get the ICS Guide Bar Free
CESSCO Combo Packs
Buy 2 ICS Chains &
Get a guide bar FREE!
ICS FORCE3 Chains for 680ES-GC Saws
FORCE3 Chains
3/8" Pitch
Used by general contractors
for cutting concrete
ICS ProFORCE Chains for 680ES Saws not applicable
ProFORCE Chains
0.444" Pitch
Used by Pro Cutters
for cutting concrete
ICS PowerGrit Chains for 680ES-PG Saws
PowerGrit Chains
0.444" Pitch
Used by Utility Workers
for cutting Ductile Iron Pipe
Technical Specifications of the 680ES
680ES Concrete Chainsaw Data Sheet
The 680ES is primarily a
3/8" Pitch Concrete Cutting saw designed for designed for General Contractors
WEIGHT 21 lbs (9.5 kg) with bar and chain
BAR LENGTH Up to 14 in (35 cm) -
ENGINE SPEED 11500 +/- 500 rpm, 2800-3200 rpm idle
HORSEPOWER 5 hp (3.7 kW) @ 9500 rpm
TORQUE 36.3 in-lbs @ 6500 rpm
ENGINE TYPE 2-stroke, single cylinder, air cooled
DISPLACEMENT 4.7 cu. inch (76.5 cc)
CHAIN SPEED 5300 fpm (27 m/s), free running
POWERHEAD DIMENSIONS 18 inches (45 cm) Length
11.5 inches (29 cm) Height
10 inches (25 cm) Width
NOISE LEVEL 100 dBA @ 3 ft (1 m)
VIBRATION LEVEL 10.5 meters/second2 (front handle)
WATER SUPPLY Minimum 20 psi (1.5 bar)
FUEL MIX RATIO 50:1 (4%) fuel-to-oil
FUEL CAPACITY 0.23 gal (.88 liter), 15-18 minutes
run time per tank
ICS 680ES Concrete Chainsaw