680ES-GC Concrete Chainsaw
WARNING: Read and understand all safety warnings and
instructions in the Operator Manual before you use this equipment. |
The 680ES is the most advanced medium sized 50:1 Gasoline Chainsaw from ICS
680ES-GC with 12 inch and 14 inch cutting depth options. Use 3/8" Pitch bars & chains
680ES-PG with 10 inch ductile iron cutting depth. Use 0.444" Pitch bars & chains
All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi
680ES-GC with 12 inch and 14 inch cutting depth options. Use 3/8" Pitch bars & chains
680ES-PG with 10 inch ductile iron cutting depth. Use 0.444" Pitch bars & chains
All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi
680ES-GC With a 12" Cutting Depth
Saw Package P/N 576154
Saw Package P/N 576154
680ES 3/8" Pitch Saw package Includes:
(1) Power Head
(1) 12" guide bar
(1) 12" FORCE3 Standard Chains
12" Saw Package only:
$1889.95
680ES-GC With a 14" Cutting Depth
Saw Package P/N 576153
Saw Package P/N 576153
680ES 3/8" PitchSaw package Includes:
(1) Power Head
(1) 14" guide bar
(1) 14" FORCE3 Standard Chains
14" Saw Package only:
$1969.95
680ES Safety Notifications
READ THE Safety NOTICES from the ICS 680ES Operation Manual,
before operating this equipment.
It is each end user's responsibility to utilize the Manufacturer's published information
for current changes.
The 680ES-GC is the most advanced medium sized 50:1 Gasoline Chainsaw from ICS
Available with 12 inch and 14 inch cutting depth options. Use 3/8" Pitch bars & chains
All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi
Available with 12 inch and 14 inch cutting depth options. Use 3/8" Pitch bars & chains
All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi
Quick links to 680ES specific products
680ES
3/8" Pitch
General Contractor
Power Head
Same Power Head
680ES-GC & 680ES-PG
ONLY:
$1289.95
680ES-PG
0.444" Pitch
Utility Saw for
Ductile Iron Cutting
Same Power Head
as 680ES-GC
Utility Saw for
Ductile Iron Cutting
Same Power Head
as 680ES-GC
Parts
The versatile 680ES
3/8" Pitch or 0.444" Pitch Configuration.
The Power Heads both use these same parts
3/8" Pitch or 0.444" Pitch Configuration.
The Power Heads both use these same parts
CESSCO Combo Packs
Buy 2 ICS Chains &
Get a guide bar FREE!
Buy 2 ICS Chains &
Get a guide bar FREE!
680ES-PG
PowerGrit Chains
0.444" PitchUsed by Utility Workers
for cutting Ductile Iron Pipe
Technical Specifications of the 680ES-GC
3/8" Pitch Concrete Cutting saw designed for designed for General Contractors
| 680ES PRODUCT SPECIFICATIONS | |
| WEIGHT | 21 lbs (9.5 kg) with bar and chain |
| BAR LENGTH | Up to 14 in (35 cm) - |
| ENGINE SPEED | 11500 +/- 500 rpm, 2800-3200 rpm idle |
| HORSEPOWER | 5 hp (3.7 kW) @ 9500 rpm |
| TORQUE | 36.3 in-lbs @ 6500 rpm |
| ENGINE TYPE | 2-stroke, single cylinder, air cooled |
| DISPLACEMENT | 4.7 cu. inch (76.5 cc) |
| CHAIN SPEED | 5300 fpm (27 m/s), free running |
| POWERHEAD DIMENSIONS | 18 inches (45 cm) Length 11.5 inches (29 cm) Height 10 inches (25 cm) Width |
| NOISE LEVEL | 100 dBA @ 3 ft (1 m) |
| VIBRATION LEVEL | 10.5 meters/second2 (front handle) |
| WATER SUPPLY | Minimum 20 psi (1.5 bar) |
| FUEL MIX RATIO | 50:1 (4%) fuel-to-oil |
| FUEL CAPACITY | 0.23 gal (.88 liter), 15-18 minutes run time per tank |
