814PRO Diamond Chains

ICS Products Home

Combo Pack - Buy 2 680ES Chains: get a Guide Bar and sprocket free

ICS 814PRO Replacement Guide Bars
CESSCO Combo Packs Buy 2 ICS Diamond Chains
and Get a FREE GUIDE BAR

Estimated Travel time for Concrete Chainsaw delivery

Free Ground Freight

Contiguous United States

On All ICS Saws, Bars, & Chains

Please click here for our Freight Policy

Items may ship direct from the factory at CESSCO Inc discretion

Genuine ICS Guide Bars for 814PRO small hydraulic saws

13 Inch 814PRO Guide Bar

Overall Length 14.9":

FORCE3 Guide Bar

3/8" Pitch 13" cutting depth
P/N 74042 - Used with 25 Segment TwinPRO or 25 Segment TwinMAX Chains (sprocket 71385)

Only: $179.95

Why is the overall length of my guidebar different from the descriptive length of my guide bar?

Guide Bars for 814PRO Concrete Chainsaws

Overall Length

A guide bar that is called a 13" bar on one saw may have a different overall length from a guide bar on a different saw. This is because the drive sprocket on different powerheads are positioned at different distances from front of the saws.

Descriptive (Called) Length

ICS Describes their guide bars by how deep the saw is able to cut into a concrete wall. A 13" guide bar cuts 13" into a concrete wall. The saw is able to cut 13" because the bar extends 13" out from the saw powerhead. That is why these two lengths are different.

It is best to use the overall length when your not sure of which guide bar to buy. The overall length will always remain a constant. However, as your chain stretches during normal use, you'll use the chain tensioner to extend the guide bar, and it is therefore a less reliable measurement.

The 814PRO is the latest in a long line of ICS Small Sized hydraulic powered concrete cutting chainsaws. 25 Segment 3/8" Pitch Diamond chains that fit small gas saws also
fit the 814PRO Hydraulic Saw