
CESSCO Combo Packs for Husqvarna Saws
Combo Packs Buy 2 ICS Diamond Chains
and Get a FREE GUIDE BAR & SPROCKET
Combo Packs Buy 2 ICS Diamond Chains
and Get a FREE GUIDE BAR & SPROCKET



3/8" Pitch ICS Diamond Chains for RockBoss Concrete Chainsaws.
Each Combo Pack for 32 Segment ICS Chains include
Two chains, one bar P/N 560807 (FREE save: $189.95) - and one drive sprocket P/N 562165 (FREE save: $32.00)
Two chains, one bar P/N 560807 (FREE save: $189.95) - and one drive sprocket P/N 562165 (FREE save: $32.00)

Overall Length 19.7"
Referred to as an ICS Rockboss guide bar
Note: To use ICS Chains on your RockBoss Saw
you MUST have the ICS Sprocket and ICS Guidebar on your saw
Combo Packs include Two Chains, One Bar, One Sprocket
you MUST have the ICS Sprocket and ICS Guidebar on your saw
Combo Packs include Two Chains, One Bar, One Sprocket
FORCE3
Standard 32
P/N 584292
$479.95
P/N 584292
$959.90
FORCE3 Premium 32
P/N 584302
$619.95
P/N 584302
$1,239.90
FORCE3 Brick 32
P/N 584299
$569.95
P/N 584299
$1,139.90

Patented roof-top diamond segment improves break-in time. Works well in all materials including light rebar and is a fast-cutting, economical chain for everyday use.

With the highest diamond concentration in the Force3 line, this chain is optimized for cutting harder materials, especially hard aggregate or heavily reinforced concrete.

This chain is optimized for abrasive materials with larger diamond segments for longer life. It is the best chain for cutting brick, block, or abrasive stone.
Chain Type |
Abrasive natural stone brick |
Soft natural Stone Concrete (Residential) |
Medium Concrete with light reinforcement |
Hard Concrete with Heavy Reinforment |
Hardness <= 3000psi |
Hardness 3000psi - 6000psi |
Hardness <= 8000psi |
||
FORCE3 Standard |
◆ ◆ |
◆ ◆ |
||
FORCE3 Premium |
◆ ◆ |
◆ ◆ ◆ |
◆ ◆ ◆ |
|
FORCE Brick |
◆ ◆ ◆ ◆ |
◆ = Good |
◆ ◆ = Better |
◆ ◆ ◆ = Best |
◆ ◆ ◆ ◆ = Special Applications |

RockBoss Chainsaws
Safety Notifications
READ THE Safety NOTICES from the Manufacturers Operation Manual. It is each end user's responsibility to utilize the Manufacturer's published information for current changes.