CC1875E3XLP-20
Small Walk-Behind Saw
Small Walk-Behind Saw
Diamond Products P/N 5800693C
Gas Model Shown
Three Phase 10Hp 575Volt Motor
20 Inch Blade Guard 7-5/8" Cutting Depth
20 Inch Blade Guard 7-5/8" Cutting Depth
Please Call
1-800-882-4959
for CESSCO pricing
1-800-882-4959
for CESSCO pricing
-
CC1800 Series
Features & Benefits
Please click here -
CC1800 Series
Specifications
Please click here -
Optional Equipment
for CC1800 Saws
Please click here -
Diamond Blades
for CC1800 Saws
Please click here
CC1875E3XLP-20 Series Slab Saw Features & Benefits
- Heavy duty handle design
- Maximum cutting depth of 7-5/8" with 20" blade
- Left or right side sawing
- Screw feed raise and lower system
- Self aligning blade shaft bearings
- Variety of power options
- Handles can be pointed in or out for operator ease and comfort
- Easy access to battery with heavy duty battery isolator switch to prevent battery drain
- Lifting hook standard on all models
- Heavy duty adjustable handles and precision screw feed to raise and lower the blade.
Electric Models are Suitable
Where Exhaust Fumes
are Not Allowed
CC1875E3XLP-20 Series Slab Saw Technical Specifications
Maximum depth of cut with a 14 Inch Blade |
4-5/8 Inches |
Maximum depth of cut with a 18 Inch Blade |
6-5/8 Inches |
Maximum depth of cut with a 20 Inch Blade |
7-5/8 Inches |
Blade shaft RPM: |
2,600 |
Blade shaft diameter |
1-1/4" |
Arbor size |
1" with single drive pin |
Blade mounting |
Right or Left |
Blade raise / lower: |
Precision screw feed |
Handle bars: |
Adjustable |
CC1300 Series Saws weigh between 225Lbs to 355Lbs
Optional Equipment for CC1875E3XLP-20 Series Slab Saws
14 Inch Slip on Blade Guard P/N 6048912:
20 Inch Slip on Blade Guard P/N 6048904:
Diamond Blades for CC1875E3XLP-20 Series Slab Saws